2018
[1] Hao Li, Shanghua Mi, Qifeng Li, Xiaoyu Wen, Dongping Qiao, Guofu Luo. A scheduling optimization method for MRO service resources for complex products[J]. Journal of Intelligent Manufacturing, 2018, Online. SCI
[2] Wang Liangwen, Wang Caidong, Du Wenliao, et al. Parameter optimization of a four-legged robot to improve motion trajectory accuracy using signal-to-noise ratio theory[J]. Robotics and Computer-Integrated Manufacturing, 2018, 51: 85-96.SCI
[3] Hao Li, Miying Yang, Steve Evans. Classifying different types of modularity for technical system[J]. International Journal of Technology Management, 2018, Online. SCI
[4] Xie Guizhong*, Zhou Fenglin*, Zhang Dehai, Zhai Hongfei, Cui Guangzhan, Construction of special shape functions for triangular elements with one edge lying in the crack front,Engineering Analysis with Boundary Elements, 2018, 91:14-23. SCI
[5] Hao Li, Yangjian Ji, Qifeng Li, Miying Yang, Steve Evans.A methodology for module portfolio planning within the service solution layer of a product-service system[J]. International Journal of Advanced Manufacturing Technology. 2018, 94(9):3287-3308. SCI
[6] Haoqi Wang, Vincent Thomson, Chengtong Tang. Change Propagation Analysis for System Modeling using Semantic Web Technolog. Advanced Engineering Informatics. 2018, 35: 17-29. SCI
[7] Wang Haoqi, Zhang Xu, Tang Chengtong, et al. A semantic model for axiomatic systems design[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017: 0954406217718858. SCI
2017
[1] Cao Yang, Wei Ning, Han Xiaoxiao, et al. Mechanical response of titanium tri-aluminide intermetallic alloy[J]. Materials Science and Engineering: A, 2017, 706: 242-248. SCI
[2] Wenliao Du, Zhiqiang Guo, Xiaoyun Gong, et al. Multifractal characterization of mechanical vibration signals through improved empirical mode decomposition-based detrended fluctuation analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(22): 4139-4149. SCI
[3] Gong Xiaoyun, Du Wenliao, Georgiadis A, et al. Identification of multi-fault in rotor-bearing system using spectral kurtosis and EEMD[J]. Journal of Vibroengineering, 2017, 19(7): 5036-5046. SCI
[4] Li Xiaoke, Chen Zhenzhong, Ming Wuyi, et al. An Efficient Moving Optimal Radial Sampling Method for Reliability-Based Design Optimization[J]. International Journal of Performability Engineering, 2017, 13(6): 864-877.
[5] Wang Hongchao, Li Liwei, Gong Xiaoyun, et al. Blind source separation of rolling element bearing'single channel compound fault based on Shift Invariant Sparse Coding[J]. Journal of Vibroengineering, 2017, 19(3): 1809-1822.SCI
[6] 王宏超, 向国权, 郭志强, 巩晓赟,杜文辽. 基于改进时频谱分析方法的滚动轴承复合故障诊断[J]. 航空动力学报, 2017 (7): 1698-1703.
[7] Xie Guizhong, Zhang Dehai, Meng Fannian, et al. Calculation of stress intensity factor along the 3D crack front by dual BIE with new crack front elements[J]. Acta Mechanica, 2017, 228(9): 3135-3153. SCI
[8] Nie Jing, Meng Xiaofeng, Li Ning, et al. Active temperature control of quartz resonant dew point sensors based on dual surface cooling[J]. Sensors and Actuators B: Chemical, 2018, 256: 1-6. SCI
[9] Hao Li, Yangjian Ji, Liang Chen, Roger Jianxin Jiao. Bi-level coordinated configuration optimization for product-service system modular design[J]. IEEE Transactions on Systems, Man, and Cybernetics-Systems. 2017,47(3): 537-554. SCI
[10] Guofu Luo, Xiaoyu Wen, Hao Li, Wuyi Ming, Guizhong Xie. An effective multi-objective genetic algorithm based on immune principle and external archive for multi-objective integrated process planning and scheduling[J]. International Journal of Advanced Manufacturing Technology. 2017,91,(9-12): 3145-3158. SCI
[11] Fan J, Liu J, Wu S, et al. Microstructure formation and interface characteristics of directionally solidified TiAl-Si alloys in alumina crucibles with a new Y2O3 skull-aided technology[J]. Scientific Reports, 2017, 7:45198. SCI
[12] Xie Guizhong, Zhang Dehai, Meng Fannian*, Du Wenliao, Zhang Jianming, Calculation of stress intensity factor along the 3D crack front by dual BIE with new crack front elements, Acta Mechanica, 2017,228(9): 3135-3153. SCI
[13] 李浩，李奇峰，杜文辽，张路明，李客. 基于服务BOM的复杂产品MRO信息集成建模研究[J]. 制造技术与机床. 2017, (10) : 124-129.
[14] 李浩，焦起超，文笑雨，罗国富，武春龙. 面向客户需求的企业产品服务系统实施方案规划方法[J]. 计算机集成制造系统. 2017,23(8): 1750-1764.
2016
[1] Wang Liangwen, Du Wenliao, Mu Xiaoqi, et al. A geometric approach to solving the stable workspace of quadruped bionic robot with hand–foot-integrated function[J]. Robotics and Computer-Integrated Manufacturing, 2016, 37: 68-78. SCI
[2] Hao Li, Yangjian Ji, Guofu Luo, Shanghua Mi. A modular structure data modeling method for generalized product[J]. International Journal of Advanced Manufacturing Technology. 2016,84 (1-4):197-212. SCI
2015
[1] Xie Guizhong, Wang Liangwen, Zhang Jianming, et al. Calculation of three-dimensional nearly singular boundary element integrals for steady-state heat conduction[J]. Engineering Analysis with Boundary Elements, 2015, 60: 137-143. SCI
[2] Zhang Dehai, Xie Guizhong, Li Yanqin, et al. Strain and mechanical properties of the VCM multilayer sheet and their composites using the digital speckle correlation method[J]. Applied optics, 2015, 54(25): 7534-7541. SCI
2014
[1] Luo Guofu, Ming Wuyi, Zhang Zhen, et al. Investigating the effect of WEDM process parameters on 3D micron-scale surface topography related to fractal dimension[J]. The International Journal of Advanced Manufacturing Technology, 2014, 75(9-12): 1773-1786. SCI
[2] Chen Lumin, Chen Zhen, C. Ansheng Feng. Image analysis algorithm and verification for on-line molecular sieve size and shape inspection[J]. Advanced Powder Technology, 2014, 25(2): 508-513. SCI
[3] Hao Li, Yangjian Ji, Xinjian Gu, Zhigang Bao, Guoning Qi.A universal enterprise manufacturing services maturity model: a case study in a Chinese company[J]. International Journal of Computer Integrated Manufacturing. 2014, 27(5): 434-449. SCI
[4] Xiaoyu Wen, Xinyu Li, Liang Gao, Hongyan Sang. Honey bees mating optimization algorithm for process planning problem[J]. Journal of Intelligent Manufacturing. 2014,25:459-472.SCI
[5] Xinyu Li, Xiaoyu Wen, Liang Gao.An effective genetic algorithm for multi-objective integrated process planning and scheduling with various flexibilities in process planning. Journal of Universal Computer Science[J]. 2014,20: 1926-1950. SCI
[6] Ming Wuyi, Zhang Guojun , Li He, et al. A hybrid process model for EDM based on finite-element method and Gaussian process regression[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(9-12): 1197-1211.SCI
2013
[1] Du Wenliao, LiAnsheng, Pengfei Ye et al. Fault diagnosis of plunger pump in truck crane based on relevance vector machine with particle swarm optimization algorithm[J]. Shock and Vibration, 2013, 20(4): 781-792. SCI
[2] 李浩，祁国宁，纪杨建，顾新建. 面向服务的产品模块化设计方法及其展望[J]. 中国机械工程. 2013,24 (12).
[3] 李浩，纪杨建，暴志刚，顾新建，祁国宁. 企业现代制造服务系统实施框架与方法学[J].计算机集成制造系统. 2013,19(5): 1134-1146.
[4] Xiaoyu Wen, Xinyu Li, Liang Gao, Wenwen Wang, Liang Wan. Improved genetic algorithm with external archive maintenance for multi-objective integrated process planning and scheduling[C]. Proceedings of the 2013 17th IEEE International Conference on Computer Supported Cooperative Work in Design. 2013:385-390.
2012
[1] Hao Li, Yangjian Ji, Xinjian Gu, Guoning Qi, Renzhong Tang. Module partition process model and method of integrated service product[J]. Computers in Industry. 2012, 63(4): 298-308. SCI
2010
[1] 李浩，纪杨建，祁国宁，顾新建，唐任仲. 制造与服务融合的内涵、理论与关键技术体系. 计算机集成制造系统[J]. 2010,16(11):2521-2529.
